Precyse does, too, if speed is 37K or faster. nm
Posted By: nm on 2007-04-19
In Reply to: Only have dial-up, no chance - mamawtypes
s
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
Spheris, SoftScript, and Precyse (if speed 37K or faster) use dial up
s
more cpl? or same but faster?
.
Not really faster....
I have worked on ChartMatrix with the M-modal software and you have to insert these special headings to do this...you press Ctrl + N and then type the heading or pick it from a list and then hit shift to get out of the heading and then start typing again. You also have to do this for each subheading (like for the PE) and to create numbered lists. Much slower than using my Expander and typing a few Keystrokes to get my heading and have it formatted per my account specs instantly. Numbered lists might be considered faster by some, but I already use an AHK script that automatically numbers lists for me. I just don't see where it will be any faster to justify the cut in our line rate.
That is low. I transcribe faster than that.
cc
They'd pay even faster if threatened with
you calling their clients. I doubt very seriously the client wants to be called to court as a witness of work done under your name.
And have you noticed how much faster sm
you need to set the voiceplayer in VR to get the same amount of lines that you got before that upgrade? Unbelievable. Mine is now 50% as opposed to 30%. I barely have time to pee now.
I can transcribe faster than edit
I don't know which VR you are using but the ones I know of and have used require tedious work. I can transcribe faster than I can edit and it puts less stress on me. Maybe it is my experience of 30 years that is the reason and maybe others don't have that much experience but I have seen the end result of those with less experience and it is still a mess when they finish editing because they don't know any difference. Or perhaps you have a vested interest in making VR look good. Not accusing just pondering.
Okay - we are running low on work now, if we get faster like they think (sm)
will occur with this new improvement, what the heck. We will just run out of work faster seems to me.
I know they anticipate more work coming in, but.... so far that hasn't benefited us much. We have lost about as much as has come in.
I fear even less work at a reduced rate.
One thing I question, doesn't everybody do ISR now? Sounded like some of the posts insinuated they were going to be forced to START doing it.
Faster, easier, and more reliable than Autocorrect.
x
They claim "it is so much faster than Spheris".
xx
Takes away my incentive to type faster
Want to work fulltime for benefits, so that requires 8 hour shift, where as previously it was just based on line count in the past, so if one had the ability to type fast and accurate you could get your line count in, in maybe say 6 hours or so and then be done with your shift for the day, thus having a greater incentive to work more efficiently. Now have to sit there 8 hours to make sure I get benefits. I find I tend to type slower, why push myself, etc. (mental thing). I log in first thing, etc. so I don't miss any minutes, etc. I find that I spend at least 30 minutes per day downloading, checking/responding to work e-mails, etc, (not to mention having any type of problems with the computer or logging in like I did this morning, took almost half an hour just to get up and running) and feel that this should also be included in work time as it would be if I was in an office transcribing, etc. Basically, when my foot hits the door to my office, I consider myself at work. Even with logging in first thing, I'm still missing minutes here and there, which add up over the weeks time period. I understand how this program can help the company out with work flow issues etc, but feel that the real purpose in the end is to just monitor the MT, which is why it will eventually be tied to payroll automatically. If you don't get those hours in, even with more than adequate line count, well then we are back to part-time with no benefits, thus saving the company $$$ in the long run. What's your opinion?
Supposedly, editing would be faster than straight typing
and the VR would be ONLY for those doing editing. Not everyone will be doing editing (at Transcend).
Forgive the typos above, I was thinking faster than I was typing...
That's what happens when you drink too much coffee.LOL
I have no real headaches. Sometimes they want a faster turnaround time...
or they want things a certain way, but no biggie..I'd be willing to deal with that for up to 5 cpl than what MTSOs want to pay.
I do over 10K a pay period. The point is this only hurts the faster people.
And that's not you. I came here from MQ and these folks are moving in that same direction. You have a lovely Easter too.
I love working on Meditech. I find it faster than other programs. It really does sm
depend on the account, the version, your connection, etc. There is not a lot of donated time in my opinion. I type upwards of 3000 lines per day (65 character count, not gross) and only work 8 hours. The spellcheck is medical on the account I am on. I use my Expanders for everything. Most of us on the account I am on do over 1500 lines a day, so maybe different accounts are set up different at the actual hospital. I have never lost a report in the middle, although I read that a lot here. I have been working on it for over 3 years.
ps: Please excuse typos! "Hands-working-faster-than-brain syndrome!" haha (nm)
.
TA Speed sm
I don't use TA Speed, I use Instant Text, so I can't answer your question about imports into it. However, I do use AutoCorrect for correcting my typos, and I have no problem with it. Your original AutoCorrect file will still be there, even after you install your software. I don't see why you couldn't just continue to just use your AutoCorrect if you wanted. During my initial training, I told the techie-type critter that I wanted to use my Instant Text (and not the TA Speed), and I *think* he went into the system and did some kind of techie voodoo, so keep that in mind (and mention it to the tech if/when you do work for them). =)
It took me a while to get up to speed
I do acute care only. I know when I was hired, I was told I would not be paid for any carbon copy information, but I don't remember about demographics...Demo information would only be a line or so, anyway at most.
I do know the computer strips out any hanging spaces at the end of paragraphs, but a lot of companies can do that with their platforms as well.
If your headers and footers are embedded in the template, I don't see how you could be paid for that as it would not be something you produced as part of the report.
As far as lines per pay period, I print out a copy of my schedule, jot down my line cout for the day and total it out at the end of the pay period. When I get my check, it always matches what I have calculated.
If you are limited in what type of work you can produce, you probably will have a hard time making lines. The more diversified you are, the more likely you can be cross trained and placed on backup accounts.
ASR Speed
Had to give you a pat on the back, ndmt. Excellent, excellent point. Why doesn't someone stop the madness?
Speed
Reading this board, I am being disabused of the notion that I am any good at MT at all. Been at it about 15 years and I'm a part-timer; always have been. I came to it when I was over 45, as a retirement job.
I don't get to use a lot of templates or normals, so this is not a factor. On a good day, with really 'clean' dictations (good sound quality, clear dictator who is not constantly correcting himself) not having to spend a lot of time looking stuff up and with the wind at my back, I can produce maybe 250 lph for 2-3 hours. I always thought this was pretty good. Then I get fatigued and drop to 200 or so. With really bad dictators/sound/subject matter, I get as low as 150. I believe my knowledge and accuracy are good, but obviously my speed sucks.
On this board I am seeing claims of sustained speeds of 300-400 lph or more. So I'm thinking that maybe VR could actually IMPROVE my production. And as my company seems to be phasing this in ,account by account, I will soon have the opportunity to see for myself.
I would like to take an informal survey of speeds and VR vs straight transcription. Anybody willing to weigh in on this subject?
Speed
Been on VR for a year, been an MT for 25, have also been a book editor/manuscript proofreader. None of that matters one bit. And, no, VR does not learn and improve--at least not the platform I use. My top VR so far is 350 lph, average about 200-250. Main problem is reports with no punctuation, SR guessing at words, having to insert numbering, but my absolute favorite is docs taking personal calls while microphone is still on. I've heard everything from 2 docs discussing whether to seduce a woman with wine, candy, flowers, a skiing trip, etc, and then one of them calling in midst of same report to ask some chick if she'd sleep with him that night, that he was having dinner catered, also docs talking to their stockbrokers and car dealers, wondering whether to buy the green or the black Jag, and docs screaming at their kids and/or spouses--all this goes into SR and the old SR gremlin tries to turn it into part of the report, just as it does when the doc says--Go back and insert so and so under the diagnoses and take out so and so from the med list and add 3 more cc's, ad nauseum. All that stuff and more will slow you down terribly. You can never count on getting good clean SR reports for a whole shift. I think I need to get a job selling SR/VR systems but I couldn't stomach that kind of dishonesty to promise that MTs would be doing 600 lph in no time.
actually, the typing speed...
is not as important as learning to use an expander to do the work for you. This is the REAL key. I type perhaps 300+ words a minute using mine.
How long did it take you to get up to speed (sm)
As to the 300 lph? I'm pretty excited as I've been offered a position with them. Thanks for the info.
Why is it so hard to get speed
with that company, are they on a slow system or something?
Speed vs. Accuracy
Medical transcription in the 21st century emphasizes production and speed. While your medical background is a big help, you will need to crank out the lines if you have any hope of making money, especially as a newbie. Please keep in mind the time, effort and energy expenditure versus the financial return. Finally, I would keep my options open, and not limit them to medical transcription. Good luck.
Voice speed
I can't help with that as when I fix the voice through Express Scribe it stays that way.
speed rate
to the person that e-mailed me, my e-mail has not been working correctly but no to your question if it is working. good luck!
Speed is a big issue
10 cpl is more than I make, but I'm pretty fast. My base rate is 7.5 to 8 cpl depending on which of my 2 accounts I'm on, but since I do enough lines daily to qualify for bonus, I acutally make 9 to 9.5 cpl per line. I average about 1500 lines per day. Production is what drives pay, so that's why I'm making what I do. I think it's unfortunate that years of experience isn't really compensated in this business, but years of experience doesn't always equal what the employer wants, which is speed and low error rate. Everyone brings a different set of skills to the job. In the end it's what you produce and not how many years you have behind you that the employer cares about. Fair or not, that's the nature of this business.
changing speed
go to the transnet player, click more at the bottom right, and it gives you options you can change.
adjust speed
tech dept could even help. They gave me another phone number to address this problem and never even got a call back. that did it for me.
adjust speed
I did this and it did not work for me. it would not budge. I'm not there any longer.
Speech speed?
You are so right. If you have lousy dictators it is easier to type them from scratch than to correct the system errors made because of them. I had to go to speech and my checks are down 40%. What system were you using? The one I am on is awful. It types every grunt and entire phrases the dictator did not say. For me it is easier to do ESLs than speech, at least with the system and dictators I have. Is there a better system out there?
LPH and increase speed
As I mentioned before, I am struggling with speed.
I am curious what most people start out typing (LPH) and how quickly you increased to your max (many mentioned they are 200-300+) lph. Anyone who will share on this?
I appreciate it!
Speed tips on VR
MG - WOW! can you tell me how you achieve such a great line count with VR? That is incredible. I have worked on eScription before and am now on Dolbey which is similar. I am starting to get used to using the function keys and not the mouse but I wonder if you could share some speed building tips? Thanks!
speed tips
I speed up the audio enough to still hear it but to be able to get through it faster. If i run into something I am not sure of, i just slow it down. I use ALL of the shortcut keys I can as well and run the spellcheck! :)
dictaphone speed
Does Dictaphone itself increase the speed of dictations in ExText? My dictators are suddenly speaking much faster than before. I have them turned down to the minimum speed, and they're still too fast. I've heard of Dictaphone increasing the speed so that we have to type faster. Do you think this is true?
emdat speed
I have version 4.91.308. The option to slow it down or speed it up is there, it says playback rate, but it breaks up horribly when you slow it down. Is there another way?
Speed Typist
Well, with the Chartnet platform it is possible to get good line counts. The problem is there isn't any work at this company. They have lost a lot of accounts! There is so little work and so many MTs that you will barely get the minimum line count!!!
And if your facility is outsourcing to them or you think (or have been told) that you will have a primary account that nobody else will be typing THEY LIE!!!
There are so many MTs that need work that they will be given access to your account!!!! You will slowly watch your work go away!!!
After leaving this company because of no work I wish you much luck...You are going to need it!!!
Talking about the speed with VR
You are 100%, could not be more right about this. I am an extremely fast MTer, do VR, have the speed up as fast as it will go and you cannot do any more than the speed allows. I am not able to do, say 600, 700 or above on a consistent basis. I can keep up with the speed fast forward but it just does not work to allow a Transcriptionist to be able to do an enormous amount of lines. If that were the case, I probably could hit $40 an hour or better.
In doing VR my speed per line
has been clocked at 130-140 but I just do not understand why you did not make more. I think it is like taking candy from a baby.
I can only say that when I go over a typing speed
of 90 wpm, the keys start overlapping, even on my computer keyboard.
For example, I type 'the' and the keyboard types 'teh',
I type 'that' and the keyboard types, 'taht', etc... I could mention a lot of examples and these are not typos.
I have noticed this also with other posters.
Another one is 'becsaue' instead of 'because', etc....
I think the fastest I could type on an electric typewriter without my keys overlapping.
typing speed
I worked for the federal government where we were monitored on our typing speed...I clocked at 150 wpm...my 19 year-old son types 110...it is VERY possible.
Hopefully the speed will pick-up
a part-time job to cover that lull. Crying here and not to be unkind is really not going to help your situation. We can give you a big ole awwwww, but that's not going to help. Get a part-time job.
Anywhere from 3 to 10 hours, depending on speed,
experience, ESLs, interruptions, platform, etc.
DVI or high speed internet?
Well, this kind of depends on other factors as well. Our hospital has used SoftMed for a long time. Those living within the phone line area were fine with the DVI system. However, now they are upgrading and it requires a high speed internet. So if you cannot get that where you live, or the direct phone line service, it could be a problem. Hope for the best for you. I am not so lucky. I cannot get DSL where I live. :(
How do you control speed of voice?
I work with editscript also and have the footpedal nightmare. I can get the files over to the express scribe no problem, but cannot control speed. I can fix manually, but the second I touch foot pedal, speed goes back to mouse voice speed. Any suggestions? Would be very helpful. I actually went through the foot pedal nightmare and got the 9pin and even the co. couldn't make it work!!
you don't need high speed internet to use an FTP--sm
you can use dial up connection and still use FTP. However, you DO need high speed internet in order to use some companies online platforms, typing into their systems.
Took me about two weeks to come up to speed and then no problem.
:)
It's just like any other high-speed internet. sm
I work for Medquist and it works great. I have had regular DSL and it's every bit as fast. My dad has cable and it's only a smidgeon faster; even my dad is impressed with my ISP. The only drawback is, it is expensive. My package costs $80 a month.
It's not available in many places yet. Until it showed up, I was stuck using satellite, which was terrible for my platform (DocQscribe) because of latency and I can see why some companies won't allow it (although it worked okay and was much better than dial-up).
You can search national ISP databases (just Google ISP and your city) BUT...they're not always up-to-date. I heard about mine because we received mailings that it was available but my ISP wasn't in any database anywhere. What I would suggest to you is find the most well-known computer store in your area (preferably privately owned instead of Best Buy, etc.) and ask them if they know of any in your area. They're usually pretty savvy.
However, if there was one in your area, you probably would have received a mailing or a visit; they want to get the word out.
Satellite is available just about everywhere but again, most companies won't allow it.
The purpose of my original post was to rid companies of the outdated notion that cable and DSL were the only reliable, fast ISPs out there. It's 2007, not 2001 and technology has moved past the old cable/DSL monopoly.
If you can get fixed wireless (not the kind at Starbucks, for example, which is not secure and not fixed) I would get it. I simply love it.
Best wishes to you.
TransTech - how long does it take to get up to speed? (sm)
Different platforms, etc. can cause a little learning lag, about how long does it take and how patient are they as you build up production?
|
