13 thousandths = 0.0013 inch ...sm
Posted By: Confetti on 2009-02-03
In Reply to: skin graft, dermatome set at 0.013 thousandths of an inch? - lisa
Subject: 13 thousandths = 0.0013 inch ...sm
Either write 13 thousandths of an inch, OR 0.00013 inch, but NOT 0.00013 thousandths.
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
0.00038 inch is 38 thousandths of an inch. sm
Subject: 0.00038 inch is 38 thousandths of an inch. sm
I'm sure of the number but I'm not positive on the form since I never deal in wires.
How to transcribe graft 1:16 thousandths of an inch?
Subject: How to transcribe graft 1:16 thousandths of an inch?
Help....
skin graft, dermatome set at 0.013 thousandths of an inch?
Subject: skin graft, dermatome set at 0.013 thousandths of an inch?
need ASAP thanks
You would write it 12/1000 inch, written the same as 1/2 inch or 1/4 inch would be
Subject: You would write it 12/1000 inch, written the same as 1/2 inch or 1/4 inch would be
0.5 inch equals 1/2 inch.
Subject: 0.5 inch equals 1/2 inch.
Always has...
12 one thousandths?
Subject: 12 one thousandths?
I find it hard to believe anyone would dictate that. Perhaps you are hearing it wrong?
0.012 inch. nm
Subject: 0.012 inch. nm
inch or "??
Subject: inch or "??
inch or " ??
inch
Subject: inch
Spell out inch--not " or in.
Example--5 feet 1 inch
0.014 inch
Subject: 0.014 inch
nm
3/8" or 3/8 inch
Subject: 3/8" or 3/8 inch
Which is the correct way to type this...
She was given a prescription today for a 3/8 inch heel lift to avoid the position that causes the most discomfort. tia.
1/8 of an inch....
Subject: 1/8 of an inch....
How would you type 1/8 of an inch lift? tia.
He is also given a new prescription for the orthotic at his request with an 1/8 of an inch lift on the right side.
0.5 inch or 1/2 inch
Subject: 0.5 inch or 1/2 inch
The pin on the fifth is actually backed out about a *0.5 inch* on today’s examination, but the arthrodesis and the metatarsophalangeal pinning feels stable. tia.
0.5 or 1/2 inch
Subject: 0.5 or 1/2 inch
Usually 0.5 is metric and 1/2 inch is not 0.5, so preferred is 1/2 inch
It's 12/1000-inch. nm
Subject: It's 12/1000-inch. nm
/
0.0625 inch.
Subject: 0.0625 inch.
x
how would you type 1/2 to 3/4 inch. sm.
Subject: how would you type 1/2 to 3/4 inch. sm.
Examination of the left hip shows there is about a ½ to ¾ inch leg length discrepancy. tia.
2 quarters of an inch would be equivalent to
Subject: 2 quarters of an inch would be equivalent to
1/2 inch -- so I would transcribe 65 and 1/2 inches or flag it for QA.
s/l wellcurve 6-inch 15-gauge
Subject: s/l wellcurve 6-inch 15-gauge
Doctor is dictating: Using a s/l wellcurve 6-inch 15-guage Tuohy needle intiroducing device,a subcutaneous tunnel was created. Is it supposed to be well-curved or is that the name of the device? Thanks in advance.
3/8-inch heel lift...
Subject: 3/8-inch heel lift...
Per AAMT BOS:
Use numerals for fractional measurements preceding a noun. Join the fraction to the unit of measure with a hyphen
I would type it as "a 1/8 inch lift"
Subject: I would type it as "a 1/8 inch lift"
inch is NOT used with metric values. That
Subject: inch is NOT used with metric values. That
is what is being said above. 1/2 inch, not 0.5 inch. They might say 0.5 inch, but it is transcribed as 1/2 inch or 1/2".
psi stands for pounds per square inch.
Subject: psi stands for pounds per square inch.
.
I'm having a brain block! How do I transcribe 12 one thousandth of an inch?
Subject: I'm having a brain block! How do I transcribe 12 one thousandth of an inch?
/
How do you type 38,000th inch diameter wire?
Subject: How do you type 38,000th inch diameter wire?
0.038", 0.038 inch, 38,000th inch, etc.? Thanks for the help.
|
