try this
Posted By: try this on 2007-06-01
In Reply to: C-Phone headset programming - NightOwl
1. Make sure the Dictaphone is plugged into the electrical source and to the wall phone jack.
2. Notice the display screen at the top of the Dictaphone. There are 3 gray buttons under the display.
3. Press the left gray button under the word PRGM.
4. The display will now read
PROGRAM
KEYS ID/TIME TEL
5. Press the gray button below the word KEYS (again, the left gray button)
6. The display will now read SELECT PROGRAM KEY. At this point, push one of the 16 black keys below the display and above the telephone keypad. If you are programming your headset, for example, select any one of the 16 black keys that seems logical to you. Press that black key.
7. The display will now say ENTER NUMBER. For headset programming, enter #*11 (that is, the POUND key, the STAR key, and then the number 11)
8. Now press the MULTIPLY KEY to the right of the telephone keypad. This key says SELECT on top of it and has an X (for multiply function) on it.
9. Press the STOP key to exit programming function. The STOP KEY is located second from the right on the top row of the clear-looking keys on the bottom of the C-phone.
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
|
