Home     Contact Us    
Main Board Job Seeker's Board Job Wanted Board Resume Bank Company Board Word Help Medquist New MTs Classifieds Offshore Concerns VR/Speech Recognition Tech Help Coding/Medical Billing
Gab Board Politics Comedy Stop Health Issues
ADVERTISEMENT




Serving Over 20,000 US Medical Transcriptionists

Don't know if this machine is broken or not...help?

Posted By: JJ on 2009-02-17
In Reply to:

Sorry to intrude here but someone in this crowd likely know the answer to my quandary(SP?)... I'm not a Transcriptionist but my neighbor wants me to sell these two machines he has. I learned trans back in high school (30 years ago!) but think these two machine "might" be broken. Both units are micro players (the Lanier VW-210 and Lanier P-101). Neither show the "units" or "location" in their digital displays... From my recall, the machine was supposed to tell you where in the tape you were (hence I believe the above indicators). Everything else works on the machines but if they're broken I don't think I should sell them. Any suggestions? I went looking for advice, online manuals, you name it. Whatever suggestions or advice you can offer would be greatly appreciated!


Complete Discussion Below: marks the location of current message within thread

The messages you are viewing are archived/old.
To view latest messages and participate in discussions, select the boards given in left menu


Other related messages found in our database

Does it still work or is it broken? sm
My sister works at a place that takes useable or fixable stuff and reconditions and sells it cheap.  I think they actually pay a small amount for the stuff that comes in too, but I'm not sure.  She's in Portland, Maine, and the place is called "End of Life Electronics." or something like that.  Sounds like a mortuary to me, but apparently business is good.
Family broken up
Does anyone else live with this experience?  After my mom and dad split up (after us kids were grown), all the siblings went their separate ways and really do not have much to do with each other.  Most of them (three brothers) have taken sides, (either mom's or dad's) but we have nothing to do with each other.  Is this odd or usually the norm?   
Broken toes!
Wow, i have broken my 3 smallest toes on the right foot.  Can you imagine, after 25 years of using the right foot, having to use the left foot until they heal?  What a headache!  I'm sure my line count will plummet!
Reply to Broken Down once...
I am finding out that he has been working all morning shutting things off - cancelled cell phone, car insurance, etc.  That's more work than he's done in a month!  I'm going to move to a town nearby my family just as soon as possible.  I also have a little hand-held friend in my home to take care of him should he come back.  I'm just getting prepared for his nonsense by gathering witnesses.  As I stated in a more recent post, he has violated his order a couple of times today.  I'm just waiting to see if the State's Atty will press charges.  Not clear right now.  Thanks for your concern.  I'll keep you all posted.
another broken record...
me too. It absolutely befuddles me that anyone would be trying to get INTO this field, especially with all the ominous signs that are right out there for anyone to see. I think new moms with babes are just blinded by the idea of "working at home" and can't see the competition they are facing.  Me, I am in nursing school... not an easy job by any means...but I'll be good at it and will find my niche quickly and will always have a job! My biggest account is making noise about getting a VR system. If I wasn't in nursing school, I would be having a panic attack instead!
Broken tape

HELP!  I have had a microcassette tape break.  Any ideas on how to fix it (if possible!)? 


Thanks!


Broken tape. sm.
I just broke my dictation tape while rewinding it.  Should I try to open it and put it back on the wheel.  Any ideas.   I has three days of dication on it.   Thanks.
broken tapes
It is not your fault, many docs still use tapes and it has happened to me, they all do not want to change and use  what works for them. Please don't be discouraged by negative comments. There are ways to splice a tape but I have forgotten what I did in the past, I think an office machine dealer did it for me. It's all part of being in the service business. Excuse any rude remarks, my heart goes out to you!
Can't type with a broken ankle?
Can't believe I am this right sided!  I have a broken ankle (right) and can't seem to coordinate my left foot on the pedal with my hands on the keyboard!  I know this will pass, but it sure is wierd!!!!
"I would rather be from a broken home than live in one"
Please get out of the situation you are in.  You are not doing yourself or your children any favors by staying with this man who has great potential for violence.  The best thing you can give your children is a healthy, happy mother.  You do not deserve to live under threats all your life.  Make plans and get out - you and your children will be grateful!
Broken tape memories
One of my docs about 15 years ago broke a tape and he spent more time putting the tape back together than it would have been if he had redictated. Another time, the same doc walked in my office and handed me the tape while I was running a finished tape through the little erase box and I immediately took it out of his hand and erased it right in front of him. I almost died. He always dictated on half speed to get more on a tape. What would you have done if you did that?
MT with broken wrist-need advice
I'm a single MT IC.  I broke my wrist 12/31, had surgery and now have a cast.  I worked a few days, but very painful and slow.  Typing with one hand now.  Haven't worked for 8 days.  No work.  No pay.  Anyone else been in this situation?  Did you apply for disability?   
He owns it. I got an email from him with broken

resume removed.


HIPAA laws being broken.

Since nobody seems to care about MTs losing jobs & work being offshored, and it doesn't appear that they'll start taxing or otherwise financially punishing companies for doing it any time soon, what if we instead go at this from a HIPAA law point of view.  If they would start fining companies who offshore for HIPAA violations for every single patient record, that might put a stop to it.  HIPAA laws don't apply overseas & can't be enforced, and in this country HIPAA is a FEDERAL LAW.  I'm going to start writing letters to Senators, Representatives, and the President, and I think if we all did that, maybe someone would take notice of this privacy law being violated....  We have to do something to save our jobs, we can't just sit back and complain amongst ourselves.  


same horrible beyondtxt program. Its is always broken.
x
My foot pedal is broken, Whats the best to buy?

Im getting a new foot pedal, I need a heavy duty one cause this last one is about to give way.


So what is a great buy? Any recommendations?


 


 


Me, too, except for those multiple toe jobs where they ALL get broken & reset! Ugh..nm
s
I'm a broken record but I'm riding the train too
I'll just work as a nurse AND run my MTSO until the train falls off the track.
I have a broken cassette tape - where can I get it repaired
I tried doing a search on here, because a few years ago there was a post about a place that repairs broken cassette tapes.  I kind of remember it being in Florida somewhere, but I cannot find the thread.  Does anyone know where I can get a cassette tape fixed??? RAdio Shack says no, they don't fix them.
Hey Admin, sorry to hear about your broken leg! Feel better soon!
Soon you'll be dancin like this!
If HIPPA laws are broken, whether overseas
or here, the US company making the contract with the overseas entity would be held liable for not adhering to HIPAA laws as they are responsible for those companies they contract with.
Probably the same broken foot pedal I had sent to me TWICE! I packed it up myself, and got it back
again in my box, unopened!!  Good luck.  Not a good start, which I guess you are already sensing!
Other than it really is broken a lot, you cannot make a decent line count on it.
It is a horrible disorganized program that is not user friendly like some of the other ones i have had. Sound quality has to be the worst of any company there is. Tech support is nonexistant for at least 6 hours to 6 days. Pay is horrible, especially if you get stuck on editing an account (about 4 cpl) Happy bankrupcy
RE: Other than it really is broken a lot, you cannot make a decent line count on it.
Your opinion is not shared by many who work at Transcend. I personally get all the lines I need using BeyondTXT and I think it is a great platform for transcribing or editing, and I do both, and believe me I have never gotten close to starving. Editing compensation is 60% of transcribing line rate by the way and my compensation is not 4 cpl as you so erroneously posted.
I taped my broken tapes back in the days.
nm
Replacing broken tapes, printing?, gas costs...gotta
s
another thought - if you can't see under the water, possibly broken glass, or other sharp objects
which could cut you, and cause infection or tetanus. 
My WORST nightmare is broken English docs mumblingrealfast with food/gum in their mouths - and I do
Is it a conspiracy?
I hear that; we had tapes broken several times where silly office people had put post-it notes on th
In retrospect, it was nearly laughable.
Let the machine get it.
x
CR machine
I have been using a CR machine to do medical transcription for seven years.  I use software that translates steno into English and "dumps" into any program, MS Word, Wordperfect, or whatever software a client may use.  I can use it to post messages or use messenger service, or to write emails, and yes it is MUCH more productive than typing, even using expanders.
Same machine?
Have you used the same laptop that whole time? If not, how long did each machine last? Do you work full time?
What is a C-machine?
What is a C-machine?
Thanks!
definitely get a fax machine

I got a Brother fax machine several years ago at Office Depot for around $80 or so.  I later got an HP all-in-one in 2005 at Sam's.  I don't remember what it cost, but it's worth it if you'll be faxing regularly.  Some of your clients may prefer a scanned version.


You could also compare on-line fax capabilities, which seems to be more current, for obvious reasons.  I can't remember the details, but I've heard it advertised on talk radio.


Just a thought.


Janome machine!!
I bought one last January for 250 and it is great! I sew all the time
VR would be better if they gave MTs the machine and
So the machine only has to get used to our sweet little voices instead of these speed demons and speech impedimentalists. 
I bought an e-machine for $399 (sm)

It was on sale at Best Buy (there were only 3)  That is w/o the monitor, cause I didn't need one at the time.  I know the support people are usually Dave or Keith (yeah, right) they barely speak English, but I don't actually know where the computers are made.   Check for sales at Best Buy and get there early.


steno machine
What kind of steno machine did you purchase to help you?
Mine is an e-machine...
refurbished, discontinued model, though of course they have a number of current models available.  Bought my on ebay but seriously considered a new Dell also, they are the best price for what you get.  My screen is 17 inches and I love it, as I use it to watch DVDs in my bedroom!   It came setup for WIFI (as many of them do now) so when I stay at a motel I can get online easily and check my e-mail.  Only way to go!
Just not a typing machine??
Then I would say you definitely have the wrong job. The raises are hardly ever there for MTs now days, you just type faster if you want to make a decent pay. The pay is down, really down from 20 years ago. You do turn into a typing machine if you want to earn a living.
Need fax machine expert!
Can anyone tell me if you have ever had the problem of your fax machine not being able to fax only to one particular number?  I can fax anywhere else, but to this one particular number.  I have tried everything I know, even so far as calling the maker of my fax machine, but no one can tell me why I get a communication error when faxing to this one particular number.  I have changed my splitter on that line, my filter on that line and had the phone company check out my line, all to no avail. It will go through every now and then, but mostly it will not go through.  This has just started happening in the last few months. If anyone has every had this problem and can give me advice, I'd appreciate it immensely!  Thanks in Advance!
Use MS Virtual Machine
You can run XP on your vista machine using Microsoft Virtual PC. You can download it here:
http://www.microsoft.com/windows/downloads/virtualpc/default.mspx

and then follow the instructions very carefully, but it does work as long as you have the original installation CD for whatever other operating system, in your case XP Home, you need. I have not tested some of the proprietary transcription platforms on it yet, but it works well for my needs so far.
Help with Lanier machine!

I pulled out my old Lanier machine to work for a company I worked for previously and I forgot how to set it to go back a couple of seconds when I take my foot off the pedal.  I tried Googling,,found nothing.. Does anybody know?  thanks


Do you have a tape in the machine?--sm
If there is no tape with dictation, there would be nothing for the machine to indicate. My Lanier has a counter but is not this model. This site has info on the 210--http://www.transcribesolutions.com/lavwmicama2.html

Hope this helps.


The machine does not actually transcribe. It
transcriber (far better title than AHDI's 'ist' word) is the living being that actually uses her ears to hear the dictation, her brain to sort is all out and make some sense of it, and her hand do the typing. The machine just records and plays back. And sometimes it doesn't even do THAT very well.
faxing without a fax machine

Several jobs I worked in the past allowed the capability to send a fax through the computer without using a fax machine.  However, I have no idea that program was set up but would really like something similar at home.  I can't figure out where to start.  Anyone know anything about this?


Thanks.


Microcassette Machine
Not sure if it will help, but I have a Sony M-2000 microcassette transcriber.  I know your sour on the Sony's, but I don't use this anymore.  Let me know if you are interested. 
white noise machine
I had a neighbor who had a dog who barked all night and also another neighbor who played music all night.  I bought a white noise machine for about $20.00.  I had a choise of ocean waves, birds chirping, rain hitting the house, thunder, so many more sounds and it worked..It would drown out the outside noises.I had tried ear plugs, calling the cops (the minute they left the dog and neighbor would start again), confronting the neighbors..nothing worked but the white nose machine..You can get one at any department store..
Need transcription machine recommendations please

I am an at-home MT and I have been using an Olympus Pearlcorder T1000 for the last several years. I am on my second one - the first one the hinge doesn't work correctly to insert/remove the microcassette tape but the machine still works (but I have to use something to flip/pry the lid open-lol) ! In fact, I am using it now because about a year or more ago I purchased another one (exact same model) as I felt it would be wise to have an extra machine). Anyway, the new one started pulling out the tape out of the microcassettes and won't backup/rewind like it should. It did this a couple months ago and I did the alcohol cleaning with a q-tip and that didn't work, so tried some silicone spray and finally it started working properly again but now I have run into the same problem. I tried all the above mentioned tactics but it didn't work this time. :( I hardly feel it is worth taking it in to have it repaired since they are not a costly machine, and BTW, I have an older Sony business quality transcription machine (around $500 over 10 years ago!) that I had so many problems with and had it in/out of the business machine repair shop several times (so additional $ spent) and still ended up with problems, so that is why I lean now more toward the cheaper models and if I get a couple years use out of them I am happy.


I am just wondering if there are any other machines that you might recommend around the $200 price range that you have had good luck with or should I just buy another Pearlcorder.


TIA. 


Do you use your steno machine to transcribe? nm
nm
Stenograph Machine/Transcribing
I was in court reporting school for 3 years. I got to over 200 words per minute on the stenograph machine. The problem with using it for transcription is that it still has to be transcribed into typewriting. The system the machine uses is a machine ShortHand - combinations of letters form different letters of the alphabet. You do not produce readable text as we know it in typing on a stenograph machine.

This would be causing more work, not solving a problem. It is used to transcribe spoken words in a courtroom or medical conference, etc., as a tool only. You still must transcribe the stenograph Keystrokes into a typewritten, readable form that could be a permanent medical record or legal document.

My name (Gloria) in stenograph is a classic example of what the phonics system looks like. Gloria is a combination of these letters:

TKPWHR is the sound "GL";
O is the "O"
R on the right side of the keyboard is "R"
Then a second keystroke would be KWA for the sound "YA."

My name would read like this on the printout from Stenograph:

TKPWHR O R
K W A

The letters print out in the same location and it is based on phonic sounds. Thus, it still has to be transcribed into readable typewritten English to be understandable.

Hope this helps. I dedicated myself to this system for 3 years of hard learning in College and then burned out in the end right after passing the Georgia Court Reporting exam.