I can flex some, but I cannot make up an entire day of nearly no work!
Posted By: wanting to work MT on 2006-01-23
In Reply to: yes, and how does one meet their required quota with no work for hours on end? - woodslady
:-( They do not want any excuses as to why people cannot work, but those of us who are here and WANT to work have nothing to do. Really makes me feel loyal to them, 'ya know????
Complete Discussion Below:  marks the location of current message within thread
The messages you are viewing
are archived/old.
To view latest messages and participate in discussions, select
the boards given in left menu
Other related messages found in our database
It depends on where you work. I have always, my entire career, been SM
in the 2000+ range. I now do that in much less time than it took me as an in-house employee with no shortcuts or anything.
However, when I went with EDiX my highest day ever was 1900 something and I had to kill myself to get that.
Those company platforms are the devil's work where MTs are concerned.
Yes, unfortunately you do have to make a pest of yourself to make it work, but.....
as the years went by that is why I stayed away from those type of companies. BTW, Noni is a fabulous product, I absolutely do not care for the "marketing techniques" they use. One of the facts of this type of industry is you cannot just recruit to make it, you have to retail. Ever since I "overhauled" my techniques and system...I never had to ask another person to some on board again. Well, nuf for now. Take care and have a blessed week!!
I flex when I have to, which is often.
xx
I'm going to try that. I did the flex point sm
counting once and was always starved.
I lost 72 lb in 2 yrs on WW, mainly flex. sm
I had trouble with Core plan b/c, ahem, "eating until full" wasn't mentally do-able for me. I needed more strict limits. WW works wonderfully, either program, but I recommend joining Curves or another type of weight-training / cardio program, or even walking, to realy boost your loss.
WW is sensible (eat ALL foods in moderation) and long-term do-able. Good luck.
need flex hours MT-ing?
www.accentus.ca
Best company for flexible scheduling. They ask for a committed number of hours but don't care when you do those hours, as long as it is within a 2-week time frame.
Flex time
so this means instead of being told to flex our time and come back later or on our day off we should be paid for the time there is no work to transcribe?
flex hours
The company I work for used to be very lenient of when we typed just as long as we got in our hours for the week. This got out of hand and they wanted more of 8 hours a day, but still lenient of when we typed (some where putting them all in at the beginning of the week and having long weekends every week, making the workload really crazy on Monday and not good for patient care). Now they are making different hours they want covered and we have to work exactly the times assigned. Some of us are fine with this, others are not. Do you work scheduled hours or whenever you want. Just curious what is happening out there in the rest of MT world.
Hand-Eze and/or Soft Flex...probably
Soft Flex forsure
I wear my SoftFlex gloves daily. I agree that after 15 minutes without them you can definitely tell a difference. I also have the Smart Glove- (had to dig them out of a drawer to make sure what the name was). To me they are just plain awkward. The bean-bag feeling is weird and feels like more of a strain on my wrists to type with, like my wrists are too elevated or something. Wore them once. My vote would be SoftFlex!
Soft-Flex gloves
Where does one find these wonderful gloves? I have tried everything and not much helps, certainly not splints. TIA
my personal experience on a set schedule versus flex
I have worked for 2 companies now that want a set schedule and they DO watch to see when I will be on. There are several reasons for it, and I'll try to explain from their standpoint.
First I found that if they have a stat and I am scheduled to be working, they NEED me to be on to take that stat. Another issue is QA coverage. They need to hire QA personnel to pick up any blanks I left and still get the report to the client withing TAT. So if I work outside my assigned shift time, they may not meet TAT because they didn't have enough QA staff. On the flip side, if the QA staff has nothing to QA, then they transcribe and take the work I would normally get, leaving me without any work when I eventually DO log in.
I am a high producer and can get my required line count in 5 hours, not 8, and when I do work 8 I may find myself without work the next day.
It is a delicate balancing act for everyone. I decided to take the 9-5 employee job, but also have a back up account on those no work available days as an IC so I can always make sure my paycheck is reliable.
You have to go with what works for you.
Soft-Flex and Handeze are 2 brfands of gloves
that MTs often use. I use SoftFlex. They are thin nylon with a bit of spandex. I got them for the little wrist cushions they have that protect the medial nerve when the heels of my hands started burning. They do protect the nerves and cured the burning, and I remember to wear them because they keep my hands warm. I love stuff that serves a dual purpose. :oD Oh, and I do have Raynaud's, so these gloves are good even for somebody with that problem.
In addition to the Soft Flex gloves I recommend...sm
an ergonomic keyboard (the old Microsoft Elite PS-2 is my favorite and I have three stockpiled); but, the thing that has made the most difference for me has been typing with my keyboard in my lap. I have rheumatoid arthritis and osteoarthitis in my hands, as well as CTS. Transcribing with my keyboard in my lap has been a miracle for me.
Has anyone had good success with Weight Watchers flex point program? sm
I tried South Beach for about 10 days and have lost 10 lbs but I want something that is lifelong and to me SB is too strict....Thinking about switching over to Weight Watchers...Anyone have good long term success with it? If so, how much did you lose and how fast?
I make that much and work...
for a hospital, from home. My colleagues at the other hospitals in this area also make in that range as well.
I work for 2 companies and make
0.0825 cents per 65 character line with spaces at one and 0.10 cents per 65 character line with spaces at the other so it just goes to show it varies.
Depends on who you work for as to how much you make..
The first online company I worked for, unfortunately, found out later they were India-based. Anyway, I work in Escription and made SQUAT. It would take 12 hours or more to make $100. Now, I work for another company that uses Escription and I can make up to $26 an hour doing VR. I think these companies set something up in the line count as how to count it and also it depends if they pay for headers, footers, etc. I definitely got ripped off the first go round. I like the company I work for now and like Escription. You can make money on this platform, although I am paid more than 3.5 for VR. That is ridiculous.
I need computer help. How do I make PRD work
PRD is on my old MQ program, but I can't seem to get it moved over to my Microsoft Word page. I can't seem to get my Stedman's Spell check over there either.
Help.
How much do you make per year doing MT and do you work PT/FT and
for a company or have your own clients? Just wondering how I compare. I work for both and made just over $24,000 last year.
ICs - how much do you make per line and do you work for ...sm
a large company, small company or have your own contracts?
I work at MQ, live in MI and make less than 10.5 cpl.
x
Make Word 03 and 07 work together!
First of all, I appologize for the LONG message, but well worth reading if you use Word. I asked this question on the Microsoft Discussion Board on 11/7/08. Here are the posts:
>>>> DeviousRedBaron wrote:
>>>>> I am running Word 2007. For work, I download a template created
>>>>> in Word 2003, then type my document in Word 2007. After this, I
>>>>> have to import header/footer info that I believe is created with
>>>>> Word 2003. This takes a long time and at the bottom of the screen
>>>>> the message "Word is replacing ..." appears. Is there any way I
>>>>> can speed this up, or avoid it all together? I love Word 2007 and
>>>>> would like to continue to use it. I do have Word 2003 also. I
>>>>> cannot change the info that I have to download. I access it
>>>>> through the intranet and it is different for each report. (I am a
>>>>> medical transcriptionist.) Speed is important in my line of work!
>>>>> Thanks in advance!!!!!
>>> "Graham Mayor" wrote:
>>>
>>>> You will need to tell us more about the importing of the
>>>> header/footer. How? From where?
>>>> What is the exact sequence of steps used to create a document. At
>>>> what point does the message appear?
>>>>
>>>> --
>>>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>>>> Graham Mayor - Word MVP
>>>>
>>>> My web site www.gmayor.com
>>>> Word MVP web site http://word.mvps.org
>>>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>> DeviousRedBaron wrote:
>>> Hi Graham,
>>> I open my transcription program (created by the transcription
>>> company that I work for) and download my reports over the intranet.
>>> These are voice files and .doc information (that ends up in the
>>> header/footer). I double click on the report I want to type up and
>>> a template box pops up. I choose the .dot template that I need and
>>> it automatically opens Word in compatability mode with part of the
>>> header/footer info already in the document. This is usually the
>>> hospital/clinic address and phone number, or what ever info that
>>> particular company has requested. On some reports, there are
>>> headings that are loaded into the body of the document as well.
>>> This process is usually pretty quick, depending on my company's
>>> server.
>>>
>>> Now, I type up my report in the body of the document. When I am
>>> finished, I have to apply the demographics to the document. This is
>>> the information about the patient, clinic/hospital numbers, doctors'
>>> names, cc info...that is also downloaded with the report from the
>>> intranet. Some of this info goes into the header/footer as well.
>>> Some of this info is "attached" to the document so it is sent to the
>>> correct departments/doctors.... Once I apply the demographics, I
>>> have to wait for Word to replace .....something. (The message on
>>> the bottom of Word flashes from a long message to a short one very
>>> rapidly, making it impossible to read the entire message!)
>>>
>>> I have read a little bit about writing a code (macro) so that
>>> everything opened with Word is opened in 2003 format. I do not
>>> start Word, it opens with my company software, so I never get to
>>> choose a template in Word. I have also tried to set the
>>> compatibility for all documents to 2003 and this does nothing.
>>> Also tried to set it up to save as a 2003 document, as well as a
>>> .dot and this does not make any difference.
>>>
>>> I am at a loss! Thanks for your quick response, it is greatly
>>> appreciated!
> "Graham Mayor" wrote:
>
>> It is the application of demographics - presumably by a macro that
>> appears to be the issue. This was obviously created by the
>> transcription company with Word 2003 in mind. Whether it would be
>> possible to improve that code is impossible to say without seeing it
>> - and really that is a job for the company that provided it, so I
>> will stick to attempting to make the function use Word 2003 rather
>> than 2007.
>>
>> http://www.gmayor.com/Toolbars_in_word_2007.htm demonstrates how to
>> set Word 2003 and 2007 to share the same platform without
>> reconfiguring the registry each time one of them is run to grab the
>> shared settings for itself..
>>
>> You should then be able to associate doc and dot files through
>> Windows Explorer > Tools > Folder Options > File Types - DOC >
>> Advanced > Open > Edit and change the application used to perform
>> the action to Word 2003, which by default should mean entering
>>
>> "C:Program FilesMicrosoft OfficeOFFICE11WINWORD.EXE" /n /dde "%1"
>>
>> in that space.
>>
>> Repeat for DOT, though this time edit the action for NEW - the
>> application used to perform the action should be
>>
>> "C:Program FilesMicrosoft OfficeOFFICE11WINWORD.EXE" /n /dde
>>
>> and the DDE message should be
>>
>> [REM _DDE_Direct][FileNew("%1")]
>>
>> In both examples if Word 2003 is installed in some other location
>> than the default shown, change the paths to reflect that other
>> location.
>>
>> --
>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>> Graham Mayor - Word MVP
>>
>> My web site www.gmayor.com
>> Word MVP web site http://word.mvps.org
>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
DeviousRedBaron wrote:
> Thanks so much, Graham!
> I have followed your instructions, but have not yet tested it with my
> company's software. I am going to test it out tomorrow. If there
> are any gliches, I will repost. If all goes well, would you mind if
> I pass this info on to my fellow MTs? (Medical transcriptionists.) I
> am sure there are numerous woman, and a few men, who could benefit
> greatly from your advise. I will await your response.
>
> Once again, thank you!!!!!
If it works for you, feel free to share with your colleagues. If double
clicking a doc or dot file opens Word 2003 and not 2007 it should work with
the company software - depending on how the company software calls Word.
--
<>>< ><<> ><<> <>>< ><<> <>>< <>><<>
Graham Mayor - Word MVP
My web site www.gmayor.com
Word MVP web site http://word.mvps.org
<>>< ><<> ><<> <>>< ><<> <>>< <>><<>
I hope this will help everyone! I know it helped me. I love typing in Word2007, but for now, I will have to type in Word 2003 until my company's software is compatible with it. At least I can have both programs running at the same time! The info on his web page about creating a toolbar is not necessary, unless it is something you need to do for Word 2007. 
I work for NTL and make .12 line
nm
Their pay is way low and you work like a dog to make minimum lines.
x
Hard 2 make money with no work.
not stretching. I work about 12 hours a day and make--sm
on average of 3500 gross lines a day. disbelieve if you want, but my money is in the bank. It is possible if you want to do it badly enough. ppfffttt.
Because MTs in the US become the "editors" to fix their work and make them look good. nm
;
you can use vonage, but there is an adapter you need to buy to make it work.
Ask at office depot about it.
Wonderful, got it--I see now it does work here too to make things smaller
thank you, very kind of you to tell me. I've made eveything on this page smaller now. Muy bien. Happy typing.
Even if they pass, how can they do the work? They will make pennies an hour and
zzzzzz
But really. To make this work, don't you have to intrude upon people's lives and SM
make a horrible pest of yourself? Honestly? My riding instructor, who is one of the dearest friends I've ever had, gets into these schemes. His latest was Tahitian Noni juice.
He had some remarkable results with it on a horse that was just a juvenile delinquent - she reared in crossties, acted up at shows when she wasn't in the arena, she was just a PMSing witch.
So I was impressed. I went to a meeting with him. Come to find out, they don't actually want you to buy the Noni juice - they want you to recruit other people to recruit other people. Biggest mess of flim-flam I've ever seen.
Depending on who you work for.... you can make good money
I usually average between $15-25 an hour doing VR. That is enough for me. I think it helps if you have companies that pay for footers, headers, spaces etc.. Good luck.
Get samples of the doc's work, if you can, and make each doc's op into a shortcut/abbrvn. The
s
funny how upgrades make work harder for us
.
I would quit. I work part time and only make about
$250 a week. Just having become a grandma would influence my decision! I can't keep my hands off the little one! 1K a week would suite me just fine! To bad I don't play the lottery.
Also work on eScription. Make more. Easier on wrists. sm
It's editing work, and the reason I personally make more is that I'm a slow typist but a fast reader and "punctuator." The eScription software is very easy to learn.
Does anyone know how to make Instant Text work with EditScript?
I have funky things happen when I use it, like losing a whole report. I have heard others say they use it and it works fine, so what am I doing wrong?
I work for a large company beginning with an "M" and make
10.5 for text and 7 cpl for speech recognition. I work 10 hours a week and make 800 a month. I'm old and slow too.
If you work for a national, what difference does it make where you live?
If you work locally, then yes I think it makes a difference. I work for a national, live in the boondocks and still do well.
I work on Escription VR and if you cannot make minimum wage, then
something is really wrong with either you or your system. I make a very good salary on VR. It can be done even at 4 cpl and that is what I am paid. I have occasional straight but 90%+ is all VR. I do not understand people saying minimum wage- that is only 6 or 7 dollars an hour, ridiculous to work for that in this kind of profession.
Read between the lines. When a company starts saying work more to make more
and you have to work in assembly-line fashion like an automaton, they are having a cash crunch. They held out one salary to you to get you to do the job, then they turn around and cut your pay because you make too much. They don't sound financially stable. If you've only been on the job 2 months, start looking elsewhere for a more financially stable company. Send out your resume and see what other companies have to offer and check out references for those companies. I and a friend in the past have gone part-time with a new company before resigning from the old one in order to make sure the new company is going to be compatible with us. It's hard to do, but it's short-term for only 1 or 2 weeks.
I love it too! I have my emails from work make a ringing tone
and pop up on my desktop,much like Yahoo messenger or IM. It's great. Never miss an email and can respond right away.
what? I used to make .02/line off my subcontractors work and felt guilty.SM
The MTSO is making .07 line off your work? I know you did not say how much you make, but the MTSO must be charging the client a high rate. Like I said, I had several subcontractors helping me as an IC for local clients in the past, and made .02/line on their work (I am the one who printed and returned the work). You deserve better and are selling yourself much too short! P.S. - Unfortunately this is what is happening to this industry, and it's called greed.
Email your supe to make sure they activated your work pool
I had this happen at another company. The supe had failed to add any accounts to my work pool.
Make off shore work illegal (to send to), lower dues, better pay - nm
s
I'm sorry I didn’t make myself clear. As an employee I can only work 40 hours per week (sm)
Overtime has to be approved by manager. I have always been an SE and could work as many hours as I wanted to, such as when I had a day of bad dictators I could work until I got my daily line count. Just wondering if all states had this law. I am working in CA.
RE: I totally agree!! I work at home can came make upwards or $25+ per hour (sm)
Where outside of my home could I make that money, not have to pay gas, buy extra clothes, etc. I am very happy right where I'm at.
Why the stupid idiots called everyone to work on the holiday to make sure they meet their 1 hour TAT
time.
I *only* make $40K a year for full time work. Now I find that isn't decent is or fair?
nm
7 cpl gross and counts blank lines, IC status-- make a ton of money because it's easy work...nm
x
|
